Fixfire® can modify your Fire Alarm system to provide Lock-down functionality.
Whilst available solutions will vary according to the type of Fire Alarm System you have installed; use of your existing Fire Alarm system infra-structure is a cost-effective means of generating a site-wide alert.
The typical arrangement includes actuation points which are installed in strategic positions, usually including main reception areas. These units can either take the form of a key-switch or Manual Call Points which are coloured ‘Blue’ or ‘White’ and clearly labelled according to your requirements.
Upon activation, the intelligent multi-tone Fire Alarm sounders are configured to sound a distinct tone which is selected to be different from other tones eg Class Change, Fire Alarm, Factory Machinery etc Depending on the type of system we can incorporate voice sounders that will annunciate a pre-programmed message of your choice. It is also possible to select specific sounders which will operate ie it is not necessary for all of the existing Fire Alarm sounder positions to sound in a ‘Lock-down’ Scenario.
To listen to an example Lock-down Alarm audio message, please click on the player below:
Any ancillary connections eg Access Control system interfacing etc that would normally operate under a Fire Alarm situation is configured to remain in normal status in a Lock-down scenario.
AlertLog™ offers a further enhancement. Following activation of a Lock-down alarm, AlertLog™ will alert any number of staff via their mobile phone via the ‘Notify App’, text-message or e-mail. AlertLog™ will also confirm the location of the actuation point without the need to visit the Fire Alarm Control Panel for this information.
For over 45 years, Fixfire® has been providing quality products, systems and services for Life & Property Protection. Whatever your requirement, please call our Compliance Team for expert advice and a refreshingly different approach.
Freephone 08000 891999.
KeyCall® is a revolutionary patent-granted Key Operated Fire Alarm Activation Device which has been developed specifically for ‘approved’ applications where standard fire alarm call points would be vulnerable to abuse. Developed by Fixfire® in response to growing demand from the Mental Health Care sector, KeyCall® is a revolutionary one-piece analogue addressable key operated manual call point.
Compatible with a wide range of Conventional and Addressable Fire Alarm Systems.
KeyCall® accepts a Euro-Profile style cylinder
Typically suited/keyed-alike cylinders are fitted so that authorised persons can activate KeyCall® using their standard door key.
Key ‘Click-latch’ mechanism ensures key ‘latches’ in correct position to activate Fire Alarm System.
Anti-ligature low-profile flush-mounting design.
Neat minimalistic one piece construction incorporating Fire Alarm interface module.
Red fire indicator illuminates when KeyCall® is activated.
Compatible with a wide range of Conventional and Addressable Fire Alarm Systems
Applications include:
- Prisons
- Mental Healthcare
- Special Educational Needs (SEN) School
British Standard Design requirements...
- Install AFD to voids greater than 800mm
- Treat downward projections exceeding 10% of the void depth as wall
BS5839-Part 1:2013 states:
22.2d) If the system Category is such that automatic fire detection should be provided in any area that contains a horizontal void of 800 mm or more in height, automatic fire detection should also be provided in the void.
22.3j) Ceiling obstructions, such as structural beams, deeper than 10% of the overall ceiling height should be treated as walls [see Figure 10a)]. NOTE 10 Within horizontal voids, beams or obstructions that are deeper than 10% of the overall depth of the void regardless of whether the void is above the ceiling or below the floor, ought to be treated as walls that subdivide the void.
VoidAlert Remote Indicator
Related Downloads
Click a sector to find out more
Fixfire® can modify your Fire Alarm system to provide Lock-down functionality.
Whilst available solutions will vary according to the type of Fire Alarm System you have installed; use of your existing Fire Alarm system infra-structure is a cost-effective means of generating a site-wide alert.
The typical arrangement includes actuation points which are installed in strategic positions, usually including main reception areas. These units can either take the form of a key-switch or Manual Call Points which are coloured ‘Blue’ or ‘White’ and clearly labelled according to your requirements.
Upon activation, the intelligent multi-tone Fire Alarm sounders are configured to sound a distinct tone which is selected to be different from other tones eg Class Change, Fire Alarm, Factory Machinery etc Depending on the type of system we can incorporate voice sounders that will annunciate a pre-programmed message of your choice. It is also possible to select specific sounders which will operate ie it is not necessary for all of the existing Fire Alarm sounder positions to sound in a ‘Lock-down’ Scenario.
To listen to an example Lock-down Alarm audio message, please click on the player below:
Any ancillary connections eg Access Control system interfacing etc that would normally operate under a Fire Alarm situation is configured to remain in normal status in a Lock-down scenario.
AlertLog™ offers a further enhancement. Following activation of a Lock-down alarm, AlertLog™ will alert any number of staff via their mobile phone via the ‘Notify App’, text-message or e-mail. AlertLog™ will also confirm the location of the actuation point without the need to visit the Fire Alarm Control Panel for this information.
For over 45 years, Fixfire® has been providing quality products, systems and services for Life & Property Protection. Whatever your requirement, please call our Compliance Team for expert advice and a refreshingly different approach.
Freephone 08000 891999.