.webp)
In order to comply with the Regulatory Reform (Fire Safety) Order 2005, most Fire Safety Systems and equipment should be inspected by the ‘user’ at specified British Standard frequencies. There is also a requirement to conduct a periodic Premises Fire Evacuation.
Fixfire® provides you with the support you need to ensure persons are suitably equipped and instructed to perform and record these important checks and tests.
User Responsibilities Training is provided on site and is tailored to your specific requirements.
Fire Safety User Checks- are you ticking all the boxes?
- Fire Alarm System - Weekly test
- Disabled Refuge Alarm- Weekly test
- Fire Fighting Equipment- Monthly check
- Emergency Lighting- Monthly check
- Premises Evacuation - Raise alarm & evacuate premises
- Fire Exit Doors- Daily check
- Internal Fire Doors- Monthly check
- Fire Door Hold-back Devices - Weekly check
- Alarm Receiving Centre Monitoring - Weekly check
In conjunction with the training, we will provide any relevant system Test Keys and Training Documents and complete live tests and checks to ensure relevant personnel understand the process.
The Fixfire® Fire Log Book is a great tool to aid compliance and if not already in place will be provided as part of the training including specific instruction to ensure correct entries are made following each test.
Would you like us to contact you? Click here.
KeyCall® is a revolutionary patent-granted Key Operated Fire Alarm Activation Device which has been developed specifically for ‘approved’ applications where standard fire alarm call points would be vulnerable to abuse. Developed by Fixfire® in response to growing demand from the Mental Health Care sector, KeyCall® is a revolutionary one-piece analogue addressable key operated manual call point.
Compatible with a wide range of Conventional and Addressable Fire Alarm Systems.
KeyCall® accepts a Euro-Profile style cylinder
Typically suited/keyed-alike cylinders are fitted so that authorised persons can activate KeyCall® using their standard door key.
Key ‘Click-latch’ mechanism ensures key ‘latches’ in correct position to activate Fire Alarm System.
Anti-ligature low-profile flush-mounting design.
Neat minimalistic one piece construction incorporating Fire Alarm interface module.
Red fire indicator illuminates when KeyCall® is activated.
Compatible with a wide range of Conventional and Addressable Fire Alarm Systems
Applications include:
- Prisons
- Mental Healthcare
- Special Educational Needs (SEN) School
Fire Log Book
Fire Log Book
Fire Alarm-Weekly Test
Fire Alarm Zone Designations
Disabled Refuge Systems -Weekly Test
Fire Extinguishers -Montly Check
Emergency Lighting Checks- Montly Check
Fire Training Certificate
British Standard Design requirements...
- Install AFD to voids greater than 800mm
- Treat downward projections exceeding 10% of the void depth as wall
BS5839-Part 1:2013 states:
22.2d) If the system Category is such that automatic fire detection should be provided in any area that contains a horizontal void of 800 mm or more in height, automatic fire detection should also be provided in the void.
22.3j) Ceiling obstructions, such as structural beams, deeper than 10% of the overall ceiling height should be treated as walls [see Figure 10a)]. NOTE 10 Within horizontal voids, beams or obstructions that are deeper than 10% of the overall depth of the void regardless of whether the void is above the ceiling or below the floor, ought to be treated as walls that subdivide the void.
VoidAlert Remote Indicator
Related Downloads
Click a sector to find out more
In order to comply with the Regulatory Reform (Fire Safety) Order 2005, most Fire Safety Systems and equipment should be inspected by the ‘user’ at specified British Standard frequencies. There is also a requirement to conduct a periodic Premises Fire Evacuation.
Fixfire® provides you with the support you need to ensure persons are suitably equipped and instructed to perform and record these important checks and tests.
User Responsibilities Training is provided on site and is tailored to your specific requirements.
Fire Safety User Checks- are you ticking all the boxes?
- Fire Alarm System - Weekly test
- Disabled Refuge Alarm- Weekly test
- Fire Fighting Equipment- Monthly check
- Emergency Lighting- Monthly check
- Premises Evacuation - Raise alarm & evacuate premises
- Fire Exit Doors- Daily check
- Internal Fire Doors- Monthly check
- Fire Door Hold-back Devices - Weekly check
- Alarm Receiving Centre Monitoring - Weekly check
In conjunction with the training, we will provide any relevant system Test Keys and Training Documents and complete live tests and checks to ensure relevant personnel understand the process.
The Fixfire® Fire Log Book is a great tool to aid compliance and if not already in place will be provided as part of the training including specific instruction to ensure correct entries are made following each test.
Would you like us to contact you? Click here.
.webp)
.webp)
.webp)
